Your insurance might cover the cost of repairs, call now to see if you qualify
Your insurance might cover the cost of repairs, call now to see if you qualify

Home > Mold Remediation

Mold Remediation

Mold is a growing problem in the United States. Some estimates suggest that 70% of homes have some type of mold growth! Don’t be too alarmed though – not all molds are toxic or problematic. That said, American cities are aging, which means instances of problematic mold are rising. If you think you may have mold in your home, a local mold remediation or restoration company would be able to quickly diagnose your problem and whether it needs serious attention.

Some mold can be toxic or cause rot in the structure of your home. Even if you treat mold on the surface, there may be mold hiding in walls or crawl spaces. It’s always best to have a mold remediation expert inspect your home and test for mold. The CDC and EPA both recommend removing all mold, regardless of species.

At RestorationUSA, we connect you with the first available mold expert in your city. If your insurance covers mold, we can help connect you with a company that is covered by your insurance provider – all at no cost to you. Our toll-free hotline is available 24/7. Feel free to also browse our directory of all mold remediation companies nationwide.

How To Know If You Have Mold In Your Home

Some people mistake dirt for mold, as they look very similar. A way to test for mold is to use a cotton swab and dip it in diluted bleach – 1 part bleach, 16 parts water. Dab it on the wall. If the spot quickly lightens, it is probably mold.

If you have noticed a musty smell within a room of your home or have seen some discoloration on your walls, then you might have an issue with mold. When this fungus is growing within your walls or flooring it is imperative that you act quickly and hire a mold remediation expert near you. We know it can be a challenging and stressful process to remove mold from your residence. Where is the right place to start and how do you know if you are getting a fair price to have the job done right?

Signs of Mold Include:

  • Discoloration of walls, floors, or ceilings
  • Surface irregularities such as peeling and/or bubbling paint or wallpaper cracking
  • Musty smell
  • Allergy symptoms while indoors
  • Visible growth
  • High humidity in the home

The fact is, the removal of mold is not as difficult as it is some people might make it out to be. The right skilled mold mitigation expert will lead you through the process and make sure the infestation is being handled properly.

Don’t go wasting money on pre-testing kits if you can see the mold already. If it is visible then it’s time to get rid of it, waiting will only make the situation worse. When a so-called mold expert believes you need to spend hundreds of dollars on pre-testing while you can easily see it, then you should probably seek out a different mold remediation company in your area.

Mold doesn’t just grow in a home for no reason. It thrives in damp areas like basements, crawl spaces, and poorly ventilated bathrooms. If you want to keep yourself and the other people in your home safe and all molds should be removed as soon as possible.

When it begins to spread throughout a residence it is because there is a moist environment where conditions are perfect for them to start growing. A simple roof leak or pipe leak can lead to this fungus spreading throughout a business or home. It thrives in high moisture levels which can commonly be found in basements and bathrooms. It can easily spread to other areas of the home once it has formed in these locations. If you notice any mold within your home or have recently found a leak, it is imperative that you act quickly. The longer you wait to fix the problem the further it will spread, which will lead to a higher cost for the mold remediation.

If you want to know how severe the problem is, you can probe the area with a screwdriver. Checking behind the drywall quickly gives you an idea of the extent of mold growth and/or damage. If the wood behind the wall is soft or crumbling, the mold has started to rot the frame.

When Do I Call A Mold Remediation Company?

The EPA recommends calling a mold remediation expert for mold that appears to affect an area of 10 sq. feet or more.

That said, things aren’t always as they appear. Surface mold usually doesn’t tell the whole story. Cleaning surface mold does not remove the mold spores, which will eventually cause recurring mold growth. That is why it is typically advisable to call a mold expert for an evaluation.

Nelson Barnes Jr., a mold remediation expert in the Washington D.C. area, told the Washington Post:

“The biggest thing, the absolute biggest thing in mold remediation is the evacuation of spores. You can go in, clean it up, wipe it down, put in a dehumidifier and you have done nothing to control the spores.”

Another reason experts recommend calling a remediation company is that there is often an underlying problem that caused the mold to begin with, such as moisture, leaks, or humidity.

Barnes went on to say: “If you get rid of the mold, but you do not correct the moisture problem, the mold will return.”

Mold restoration companies also specialize in plumbing and water damage. They will be able to not only identify the cause and source of mold growth but also fix whatever the problem is. Mold evaluations are usually free.

Back to the top

What Causes Mold

  • Lack of sunlight
  • Moisture
  • Humidity
  • Lack of air circulation
  • Pipe leaks
  • Temperatures between 72-81 Fahrenheit

Mold can grow in any home, but older homes are at greater risk. Aging pipes, cracked walls, or cracked ceilings – even if not noticeable – can cause just enough moisture to create a perfect habitat for mold.

Back to the top

How To Prevent Mold

According to the EPA, there are several steps you can take to prevent mold and limit moisture:

  • Clean gutters and extend downspouts so that they deposit water away from the home.
  • Check that the grading near the foundation causes water to run away from the home and not toward it.
  • Make sure the home is properly ventilated, especially the basement, with adequate air supply and return ducts.
  • Run a fan to promote air circulation.
  • Replace air filters regularly.
  • Keep indoor humidity below 60 percent (ideally between 30 and 50 percent) relative humidity.
  • If you see condensation or moisture collecting on windows, walls or pipes, act quickly to dry the wet surface.
  • Increase ventilation or air movement by opening doors and windows when practical. Turn the heat or cooling off and just run the fan in the HVAC system.
  • Cover cold surfaces, such as cold water pipes, with insulation.
  • Places that are often or always damp, such as bathrooms, can be difficult to keep mold-free. Try increasing ventilation by running a fan or opening a window and cleaning frequently.

Back to the top

What is the Mold Removal Process?

Discovery: We will help you locate mold remediation professional in your area who has the proper equipment and training to help get your home or business back to normal. They will remove any materials that have been infected with the mold, such as drywall, insulation, and baseboards. It can be quite difficult to return to their previous uncontaminated state, thankfully these products are fairly inexpensive to remove or restore.

Sealing: Professionals will seal off the work area using plastic sheeting. This is done to prevent mold spores from spreading from the infected area while the current mold is treated. When working with mold proper protective clothing, including high-filtration face masks, and vinyl or neoprene gloves should be worn at all times. When mold is being treated it is common for harsh chemicals to be used. For larger projects that involve multiple rooms or thick infestations, the mold remediation expert should wear a full protective suit on top of the face mask and gloves mentioned earlier.

Air Filtration: Experts will then use specialized equipment such as HEPA (High-Efficiency Particulate Arrestance) air filters, HEPA vacuums, commercial-strength dehumidifiers, industrial blowers, and air scrubbers. After mold is physically separated from its source, the air should be cleaned from the mold spores that are floating around. By using HEPA, mold experts replace dirty moldy air with clean fresh air through their ventilation systems. Standard air filters will not work and could exacerbate the problem.

Back to the top

How Much Does Mold Remediation Cost?

Mold remediation has an average cost of $2,500 for typical cases. Most homeowners pay between $1,250–$3,500 in total for the job to be completed fully, which comes to around or $12 to $35 per square foot. The cost of mold remediation is determined by the severity of the infestation, where it occurred, and what types of materials were affected by it. A small mold removal job costs an average price of $500–$1,500 while a larger job costs between $3,000-$6,000.

If the mold was found early and is properly detected and handled, the out of pocket cost to the homeowner will be lower than the average. Repairs to damaged drywall, insulation, sub-flooring, siding, and other possible areas may be required if untreated for too long, which can lead to increased costs associated with the mold remediation job. In certain cases, the cost of mold remediation will escalate to tens of thousands of dollars if the mold has spread throughout multiple rooms and is growing within the walls, floor, and ceilings.

Can I remove mold myself?

Want to just keep things cheap? Small mold projects can typically be handled by a handy homeowner, with some free time, and a few basic supplies from the hardware store. This can be done to help manage small mold issues like some mold in the corner of the shower or on the ceiling of a poorly ventilated bathroom. If you have tried this before, but the mold continues to return, then you should hire an expert to help with the mold remediation.

Back to the top

The Most Common Household Molds

The most common indoor molds are Alternaria, Black Mold, and Penicillium.

That said, there are literally thousands of species of molds. Sometimes you might not ever find out which type of mold is in your home. Depending on what class it is and how severe the infestation is will determine the sort of mold remediation service which will be required to fix the problem.

Mold often is not associated with bad hygiene or cleanliness. People with clean homes can still develop mold. Mold can easily form and start spreading a result of heavy rains, high humidity, or mild flooding. It can be a big concern for the homeowner since it can lead to severe property damage as well as a variety of adverse health effects. The longer someone is exposed to mold, the greater the probability that they may have an allergic reaction or experience respiratory problems.

Mold can be found everywhere. It is a form of fungus which grows from microscopic spores that float in the air. It can grow in most environments, especially ones that are humid and between 40 and 100 degrees. You can quickly spot the most visible form of mold, called mildew, which starts out as small black spots. As time passes it will develop into larger colonies. Once this happens it is time to contact a mold remediation service.

What Type of Mold Do I Have?


An outdoor mold, which can easily grow indoors. Unlike most other molds, it can thrive in humidity-limited conditions. It can be found anywhere in a house, wrapping around pipes and plumbing fixtures, in damp areas, and even dryer areas such as curtains, furniture, and ductwork. Alternaria is a dark-colored mold with a woolly texture. It can cause minor allergic reactions and exacerbate asthma.

Black Mold:

Black mold grows in areas where moisture and humidity are present always. It will thrive in damp environments such as kitchen or bathroom tiles, near air conditioning units, in or around pipes, drains, and sinks. Black mold is easily recognized by its black color, slimy texture and the musty smell it gives off when a significant amount is present.

Chances are you’ve heard of this type of mold due to the severe health issues that it can cause. The symptoms can be as minor as mild as a runny nose and some sneezing, but it can also cause vomiting, rough coughing, sinus pressure, asthma attacks, sinus infections, and long term respiratory problems. If there is black mold in your home act now, we will help you locate a mold remediation service in your area to help you get your home safe again.


Penicillium is one of the most common types of mold and will commonly grow on food and porous surfaces such as mattresses, within insulation, in carpet, and in curtains. It can spread easily from surface to surface if it is not handled in a timely manner. Penicillium appears green or blue and can cause cold-like symptoms, sinus infections, and inflammation of the lungs. It is a widespread, natural fungus, that thrives in temperate and subtropical regions.

If you notice mold in your home or business, please do not wait to contact RestorationUSA. Every day that passes where the mold is not taken care of, the more severe the problem will become. There are several different forms of mold that can be found growing in a house or building. Not all types of mold will look the same and they will pose different health risks depending on what classification it is. Homeowners are not expected to be able to recognize each of these specific types of molds on their own. The experts working for mold remediation services will be able to identify the type of mold and eliminate it before any significant health problems arise.

Back to the top

Mold Health Risks

Exposure to areas where mold is rampant can cause a variety of health effects in both children and adults. Some of us are more prone to have our health impacted by a mold infestation. Exposure may lead to symptoms that are similar to seasonal allergies, such as sneezing, a stuffy or runny nose, red itchy eyes, and itchy skin.

Many individuals may have more extreme reactions, such as those with allergies or those who have asthma. People with immune deficiency problems or who have a history of lung disease, or other underlying respiratory issues are more vulnerable to mold. Significant reactions may involve a high fever, shortness of breath, blood in the cough, and a crawling skin sensation. If you or members of your family have any of these health disorders or have experienced any of these symptoms, you should consult with a professional medical clinician for diagnosis and care.

Back to the top

How Long Does Mold Remediation Take?

Mold remediation typically takes 1-5 days to complete. It all depends on the magnitude.

Taking care of a mold infestation as soon as it is noticed is very important. Once we help you get in contact with a mold remediation expert in your area they will set a time to come and calculate the magnitude of the contamination. They will then explain how they will approach removing and cleaning molds from your home/business. The expert will then give you a timeline on how long it will take for mold remediation. The removal of this fungus is aimed at cleaning up mold growing and avoiding exposing any people to the harmful spores.

Mold will invade your home through open doors, windows, vents, and air-conditioning/heating systems. They can develop when mold spores drop into areas where there is excessive moisture, such as where leakage might have occurred in roofs, pipes, walls, plant pots, or where floods may have occurred. Any porous building materials or household items, such as carpet, drywall, and insulation, will promote the growth of molds. Paper products, such as ceiling tiles, wood, cardboard, and wood products, are especially conducive to some mold production.

Back to the top